Bananian Linux

View Issue Details Jump to Notes ] Issue History ] Print ]
IDProjectCategoryView StatusDate SubmittedLast Update
0000065Bananian Linux[All Projects] Kernelpublic2014-11-24 15:512014-12-04 08:44
Assigned ToNico 
StatusresolvedResolutionno change required 
Product Version14.11 
Target VersionFixed in Version 
Summary0000065: Device does not boot
DescriptionI'm using a fresh installed SD-Card (dd bananian-1411.img)
BaPi is comig up, then stops and shutting of immediatly.
Steps To ReproduceSerial Console output:
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: sw_hcd host driver
<6>usb usb1: Manufacturer: Linux 3.4.104+ sw_hcd-hcd
<6>usb usb1: SerialNumber: sw_hcd_host0
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected

it dies at this point
TagsNo tags attached.
Attached Files

- Relationships
related to 0000061resolvedNico Banana Pi will not power on after upgrade / clean flash to 14.09 
related to 0000068resolvedNico disable OTG in default configuration 

-  Notes
Nico (manager)
2014-11-24 16:11

Which microUSB do you use for power supply?
guest (viewer)
2014-11-24 20:37
edited on: 2014-11-24 20:49

This one between SATA and SATA-Power.
I tried also the other one (OTG). This resulted in a boot loop.

guest (viewer)
2014-11-25 06:28

1.) Do older versions of Bananian boot? 14.09? 14.08?
2.) Where did you buy the device? And when?
3.) Does Raspbian and/or Lubuntu boot?
4.) Could you please rewrite a clean 14.11 image, mount the boot partition and copy script.bin.otg-off over script.bin. Is it booting now?

Boot loop when power is connected to OTG is normal behavior.
guest (viewer)
2014-11-25 08:31

1) I have tried it with version 14.09. With exact the same result.
2) I bought it from a german dealer 2-3 months ago.
3) Yes, Raspbian AND Lubuntu both runs perfect.
4) Oh yeah! Now it's booting and I can login.
Nico (manager)
2014-11-25 10:16

2.) Which dealer was it?
4.) That was what I expected. But OTG won't work with this configuration.

Would you like to test some more configurations? Then I would prepare them for you, trying to get OTG running on your device.
guest (viewer)
2014-11-25 11:42

2) Why do you ask?
4) This is not a problem (at least at the moment)

Yes of course. I am pleased if I can help improve the project.
Nico (manager)
2014-11-25 15:00

I know from another user having similar problems while most Banana Pi work fine.
He also bought his device from a german dealer (but not Reichelt)

Could you please write me a short mail and I will send you some script.bin files for testing.
See [^]

I would really like to resolve the issue, so thank you very much for your help!
Nico (manager)
2014-11-26 06:32

It was a problem with the power supply, not Bananian Linux.

Updatet the corresponding FAQ entry:
Q: I flashed Bananian to SD card (or upgraded from release 14.08) but it is not booting
A: Make sure you use the 'DC in' port in combination with a reliable 2 A power supply!
Starting with release 14.09 the USB OTG port is enabled by default.

- Issue History
Date Modified Username Field Change
2014-11-24 15:51 guest New Issue
2014-11-24 16:11 Nico Note Added: 0000090
2014-11-24 20:37 guest Note Added: 0000092
2014-11-24 20:45 guest Note Edited: 0000092 View Revisions
2014-11-24 20:49 guest Note Edited: 0000092 View Revisions
2014-11-25 06:28 guest Note Added: 0000093
2014-11-25 08:31 guest Note Added: 0000095
2014-11-25 10:16 Nico Note Added: 0000096
2014-11-25 10:23 Nico Assigned To => Nico
2014-11-25 10:23 Nico Status new => assigned
2014-11-25 11:42 guest Note Added: 0000097
2014-11-25 15:00 Nico Note Added: 0000098
2014-11-26 06:31 Nico Relationship added related to 0000061
2014-11-26 06:32 Nico Note Added: 0000099
2014-11-26 06:32 Nico Status assigned => resolved
2014-11-26 06:32 Nico Resolution open => no change required
2014-12-04 08:44 Nico Relationship added related to 0000068

Copyright © 2000 - 2020 MantisBT Team
Powered by Mantis Bugtracker